Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
front forks
hello to all, I am in the process of making several repairs to my '86 Aspy. the problem I am having at the moment is that I have stripped out the allen head bolt at the bottom of my left fork tube. If anyone has any tricks to getting it out (short of drilling and using an easy out) I would love to know how it could be done.
Reply
#1 12-02-2007, 01:44 PM,
Hello Racejunky. I had to drill both of mine when I replaced the seals and dust covers. Nothing to it if you just drill the head off the allen bolt, remove the lower fork and the bolt will twist out with your fingers. Replace with a new metric allen head and you are good to go.
Pappy
1998 GL1500 SE
Shelby, NC
[Image: VisitedStatesMap.jpg]
[Image: VisitedProvincesMap.jpg]
Reply
#2 12-02-2007, 03:08 PM,
Although this isnt about drilling the heads of the lower allen head bolt, sometimes if the springs have been removed PRIOR to removing the bolt, the inside lower tube will turn thus preventing removal of the bolt. A simple method is to remove the anti dive mechanism an locate a hole which is present, insert a suitable tool then lock the inner tube to the fork slider and then remove the allen bolt.
The only stupid questions are the one's that are not asked.

Reply
#3 12-02-2007, 03:40 PM,
thanks guys I needed that info
Reply
#4 12-05-2007, 06:10 PM,
Thanks Pappy that worked like a charm, and so did The advice that Tricky gave me. I wound up needing that when I went to tighten eveything down. I have been trying to get this posted for some time I even had Don contacct Vic to see if we could figure out why I couldn't get it to go. As it turns out it seems to have been my puter. So I'm gonna try this again.
Reply
#5 01-08-2008, 08:05 PM,
Glad it worked for you racejunky. This forum is a great place for information on doing anything that comes up on our old babies. Somebody here has seen most everything that can come up.
Pappy
1998 GL1500 SE
Shelby, NC
[Image: VisitedStatesMap.jpg]
[Image: VisitedProvincesMap.jpg]
Reply
#6 01-09-2008, 03:22 AM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  front forks ironhead1970 10 1,187 03-21-2014, 05:04 PM
Last Post: ironhead1970
  Front forks PanMan75 20 1,374 04-11-2011, 04:31 AM
Last Post: PanMan75
  front forks 3 422 10-29-2010, 10:42 AM
Last Post: Guest
  air in front forks mikey b 3 474 09-13-2010, 07:22 AM
Last Post: neoracer
  front forks SIR tricky 6 638 08-24-2010, 08:55 AM
Last Post: edbikerii
  Front Forks Help! aspengold 6 518 09-07-2009, 11:04 AM
Last Post: aspengold
  Need Help on front forks 14 881 06-20-2008, 05:40 AM
Last Post: catman
  Drain and Refill front forks 3 407 06-16-2008, 02:02 AM
Last Post: Guest
  How Much Oil in Front Forks? Mr Wizard 6 920 10-23-2007, 02:14 PM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html