GL1200 GOLDWINGS › TECH CENTER › CHARGING SYSTEM AND CONVERSION ALTERNATORS v
cooling fan

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cooling fan
alfie1eye Offline
Member
***
 		Posts: 30
Joined: Jun 2012 Location: Bike: 
Hi,
I got the Poorboy alternator kit to fit, but was wondering if fitting an after market fan such as a perma cool unit would give more room than keeping the stock fan as the permacool is some 20mm thinner, would this save having to cut the existing fan unit up?
This is going on a 1985 Interstate.
Reply
#1 08-22-2016, 02:44 AM,
SIR tricky Offline
WISE AND HELPFUL MODERATOR
******
 		Posts: 4,305
Joined: Dec 2006 Location: Waterford, Ontario Bike: 1985 Aspencade, Satellite Blue
I installed a similar fan but still had to do a little trimming but it worked fine, not to the blades though
The only stupid questions are the one's that are not asked.
Reply
#2 08-22-2016, 08:41 AM,
alfie1eye Offline
Member
***
 		Posts: 30
Joined: Jun 2012 Location: Bike: 
(08-22-2016, 08:41 AM)SIR tricky Wrote: I installed a similar fan but still had to do a little trimming but it worked fine, not to the blades though

Do you happen to know what size fan can be fitted & what cfm would I need to match OEM fan?
Reply
#3 08-22-2016, 03:35 PM,


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html