Thread Rating:
  • 5 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Relay for Electric Fan
I have changed my fan to a 10 inch push fan and was wondering what others have done for the fan relay switch. Input appreciated...
vern38 AKA Squirrelly
#1 10-11-2013, 05:53 AM,
you could just hook it into the circuit same as original,unless you are also referring to the fact that your fanswitch is bad also,but if the fan current draw is too much and trips the original fuse circuit then you could wire in a relay which would power fan off the battery once the fan circuit is tripped

sei fan circuit uses a 10 amp so should be adequate to run the new fan
1987 Aspencade 129K
1986 SEI 93K
2014 Tri-Glide HD 17K

#2 10-11-2013, 11:48 AM,
I went with your suggestion to use the original wiring and ran wiring for a bypass switch as well. Tested it tonight and it works great cools the bike down twice as fast as the other fan did.
vern38 AKA Squirrelly
#3 10-11-2013, 06:50 PM,

Forum Jump:

Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html