+- GL1200 GOLDWINGS (http://www.gl1200goldwings.com/gl1200)
+-- Forum: TECH CENTER (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=39)
+--- Forum: EXPERIMENTAL MODS (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=55)
+--- Thread: Oem fuse box (spare) convert to accessory fuse box! (/showthread.php?tid=10650)
Oem fuse box (spare) convert to accessory fuse box! - steelhorseangel - 11-21-2014
Hi Wingers
I've now bought a large box
of 1200 spares and discovered a
spare 1200 (1986) main fuse box.
My Wing is '84.
One main 8 pin plug was missing,
the second 4 pin was badly broken.
I've traced all the wires and marked
them etc.
Has anyone ever converted a spare
fuse box to use as an accessories
fuse box please?
Most of the aftermarket ones
are too wide and cheaply made in the UK.
I've now benched tested the circuits.
Some will work, others wont.
The top ACC + & - wont work.
I've got live & ground and I've
been using a multimeter and
a bulb with + & - etc.
This little fuse box is partly
working, yet not fully working?
Anyone ever done this conversion
please? I would prefer to use
this quality Honda part than
sub standards etc
Many thanks y'all!
Regards
Angel