+- GL1200 GOLDWINGS (http://www.gl1200goldwings.com/gl1200)
+-- Forum: TECH CENTER (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=39)
+--- Forum: ENGINE AND TRANSMISSION, FINAL DRIVE (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=16)
+--- Thread: GL1200 Oil Orfice (/showthread.php?tid=10389)
GL1200 Oil Orfice - Spacenut - 12-28-2013
Hi Everyone;
Replacing head gaskets on my wing, after removing the head noticed the oil orfice is buggered up from when I had a shop replace the gaskets last time. Like to replace if possible, the honda part number is 12238-MG9-000 which is no longer available, does any one have one that I can buy from them? The one in the bike is out of round like they tried to remove from block with pliers. Also if i cannot get one would it be possible to try to make round again the best I could , will it cause problems?
Thank you, John
RE: GL1200 Oil Orfice - Poorboy - 12-28-2013
(12-28-2013, 12:46 PM)Spacenut Wrote: Hi Everyone;
Replacing head gaskets on my wing, after removing the head noticed the oil orfice is buggered up from when I had a shop replace the gaskets last time. Like to replace if possible, the honda part number is 12238-MG9-000 which is no longer available, does any one have one that I can buy from them? The one in the bike is out of round like they tried to remove from block with pliers. Also if i cannot get one would it be possible to try to make round again the best I could , will it cause problems?
Thank you, John
Hi John,
PM me your address & I'll send you one.
Ride Safe, Don (Poorboy)
RE: GL1200 Oil Orfice - bs175dths - 12-30-2013
aint this just a great site????
