Click Click went the bike

[jaycojman43]

Ok. So I put a new stator in, get the bike back togther. Nothing happens. Get a new battery nothing. So I figure the starter is bad. Buy parts and tear it out. Brushes were broke off the mounting for them. Rebuild and clean the starter. Click nothing, The solenoid clicks. So I pull the starter out of the bike. I connect a wire from the starter mounting screw to the battery.(ground wire). Connect the Positive battery cable to starter and connect the battery. CLICK, starter does not turn. So I reach for my meter, I put the red lead on the postive side of the battery, black on the starter. Reads nothing. I turn key and kill switch on. Push the start button. Now I read 11.98 volts on the meter, And still the solenoid clicks and the starter does nothing.. So am I doing it right to bench test the sarter. What I think is I rebuild the starter and some how did it wrong.... Any suggestion on what is wrong.. I put new brushes and seals and bearings in the starter. I cleaned the amature up some with fine sandpaper. Just enough to clean the grim of the contact area.. HELP I want to get it running..Thanks