Thread Rating:
  • 3 Vote(s) - 2.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carb removal...
Hi I think I need help with the removal of my carbs. I took the fairing out and change my timing belts, spark plugs, oil and filter. Now I want to clean my carbs because the bike was sitting for a few years before I purchased it. I read the books/manuals and unhooked everything up to the throttle cables. I loosen up the lock nut of the cable but could get them out right away. I struggle a little and then had to stop to go to work. Any trick to get the cables unhooked from the cam? I can pull the carbs out enough to see the back of the cam...

After that, will I believe I should take the choke cable off (I'm at work so don't have the books with me). Will come right out after? It doesn't seems to be very easy and can only imagine the fun to put them back in. I am sure I will be cursing in French and in English.

Any tips/tricks will be appreciated.
#1 04-09-2012, 10:54 PM,

Messages In This Thread
Carb removal... - by Discus - 04-09-2012, 10:54 PM
Re: Carb removal... - by wingandaprayer - 04-10-2012, 10:29 AM
Re: Carb removal... - by Discus - 04-11-2012, 04:06 PM
Re: Carb removal... - by SIR tricky - 04-11-2012, 04:23 PM
Re: Carb removal... - by Discus - 04-11-2012, 04:44 PM
Re: Carb removal... - by Guest - 04-11-2012, 08:55 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Carb Removal 1985 Aspencade Frank 8 4,476 04-20-2013, 03:35 PM
Last Post: mancrypt
  carb manifold removal or moving 10 1,857 06-12-2009, 05:25 AM
Last Post: Ed Z

Forum Jump:

Users browsing this thread: 2 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html