Thread Rating:
  • 4 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New carbtune
I tried my new Carbtune last night for the first time and found it to be outstanding. I had some concerns with the plastic adapters, I thought they may be a bit weak at first but they work just fine. It is easy to use and the concept of the metal bars instead of liquid is much better. I am sure sold on the Carbtune, I really like it.
Ride safe have fun and enjoy. Lane
1985 Aspencade
2002 Vulcan
Reply
#1 09-02-2010, 03:36 AM,
I have one also & it is vary easy to use. Poorboy
Reply
#2 09-02-2010, 04:36 AM,
I used my new Carbtune last weekend. Wonderful tool. Bike runs much better now - hopefully my gas mileage will improve (was down around 32mpg US for 50/50 city/hwy). Sync was way off - both left plugs were wet. Also put in a set of new plugs, fresh 15W40, and Seafoam in the gas.

Hardest part was removing the vacuum port screws. Two were easy, one required the impact driver, one needed a vise grip.... then I cut a slot on the head to use a flat blade driver in the future.

My Visa bill showed up - total cost was $108 Cdn at my door. Well worth it.
Reply
#3 09-02-2010, 07:49 AM,
I like mine also. Nicest thing about it is that it will never spill mercury or blue kool aid.

If your tool ever gets sticky don't forget that there is a cleaning process available from the manufacturer that will clean the inside of your tool and make it work like new again.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#4 09-02-2010, 10:27 AM,
bluewing Wrote:I tried my new Carbtune last night for the first time and found it to be outstanding. I had some concerns with the plastic adapters, I thought they may be a bit weak at first but they work just fine. It is easy to use and the concept of the metal bars instead of liquid is much better. I am sure sold on the Carbtune, I really like it.

plastic?

maybe nylon too? I sure like mine.

I finally made some progress with my low speed gurgling .... drilled out the pilot screw caps and backed out the screws a half turn.... I no longer see carb rebuild kits in my near future.... maybe a needle shim but then I'm not finished playing with the mixture adjustment yet ... Ms Piggy's days may be numbered. I would greatly miss her but it's getting kind of cramped in the garage with the vintage Corvette I just added to the stable... and I need a dirt bike.
Reply
#5 09-02-2010, 06:45 PM,
What Corvette did you add to the stable?
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#6 09-03-2010, 04:25 AM,
What a shame.. that is the prettiest ace I have seen . Just build on an addition, you can never have too much room.
'85 GL1200 Aspencade
'07 Shadow Sabre 1100
South of Sarnia, SW Ontario, Can
Reply
#7 09-03-2010, 04:39 AM,
admin Wrote:What Corvette did you add to the stable?

Not one I would have chosen for myself, it was for wife's 60th birthday, complete with vanity plate. It's an '84 automatic, all stock, 74K miles.

[Image: noivette1.jpg]
Reply
#8 09-03-2010, 06:43 AM,
LorneG Wrote:What a shame.. that is the prettiest ace I have seen . Just build on an addition, you can never have too much room.

Thanks, I'm hoping her good looks will bring a pretty price in the spring, she won't go for another year otherwise. I spend too much on toys to afford an addition, I have a 4 cages including the 'vette, 3 boats and a snowmobile. I'm getting too old to worry about keeping things for the long term anyway.
Reply
#9 09-03-2010, 06:56 AM,
I think your wing would very nice parked beside that vet. Iff it were me I would get rid of a boat or two. :lol: :lol:
Ride safe have fun and enjoy. Lane
1985 Aspencade
2002 Vulcan
Reply
#10 09-03-2010, 07:24 AM,
snowy.vtwin Wrote:
admin Wrote:What Corvette did you add to the stable?

Not one I would have chosen for myself, it was for wife's 60th birthday, complete with vanity plate. It's an '84 automatic, all stock, 74K miles.

Nice. I had an 86 convertible and it was a really fun car.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#11 09-03-2010, 07:35 AM,
admin Wrote:
snowy.vtwin Wrote:
admin Wrote:What Corvette did you add to the stable?

Not one I would have chosen for myself, it was for wife's 60th birthday, complete with vanity plate. It's an '84 automatic, all stock, 74K miles.

Nice. I had an 86 convertible and it was a really fun car.

'84 had only the coupe, 1 available engine L83 crossfire @ 205hp and was the roughest riding C4 of all. But wife don't care cuz it makes all the town bitches envious. The roads are so rough around here I don't even care to drive it, I'm hoping wife will want to trade it for a Toyota in a couple years.
Reply
#12 09-03-2010, 12:01 PM,
That's why I held out for the 86. The hard ride of the 84/85 was a little crazy.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#13 09-03-2010, 12:08 PM,
bluewing Wrote:I think your wing would very nice parked beside that vet.

Yes it does and will.
I am putting a new floor in one of my boats in hopes of generating some $$ in the spring to pay off toys, my wing is riding on the home equity account :roll:
Reply
#14 09-03-2010, 12:10 PM,
admin Wrote:That's why I held out for the 86. The hard ride of the 84/85 was a little crazy.

I look at the rough ride as a good thing cuz that means I won't drive it/beat it up, and wife is happy, etc. I have to say it will take a corner like ok never mind even slowing down. I think springs from one of the early '90's can be fitted on it but I'm hoping to not put money into it... has new tires and battery great paint and new weatherstripping (except outer side windows) no leaks, and came with a nice cover. I have receipts back from '99 for maintenance stuff, it has had only about 4K miles put on it in past 10 years. The rear seal was a little weepy but it appears it could re-seal ok, at least no actual drip so far, I put Valvoline maxlife oil in it.
Reply
#15 09-03-2010, 12:24 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Success! - Photos - Carb Sync with my new CarbTune Pro Harry Slimm 12 5,604 11-27-2010, 05:55 AM
Last Post: 85GL1200I
  Morgan Carbtune 4 3,315 07-01-2009, 07:34 PM
Last Post: Tropicalsuns
  Morgan Carbtune-GREAT SERVICE ! 15 6,618 03-17-2009, 06:45 PM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html