Thread Rating:
  • 3 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
starter kit just for 85-86-87 (gl1200) nothing for 1984!!!!
admin Wrote:You can safely remove and reinstall the starter on a 1984 GL1200 because the factory provided a means to keep the sprocket and chain in place. I know that for certain because I have an 84 and have tried to knock the chain and sprocket out of place with the starter out but it cannot be done.

2 places to get the 84 starter rebuild kit:

<!-- m --><a class="postlink" href="http://shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=84+gl1200+starter+rebuild+kit&_sacat=See-All-Categories">http://shop.ebay.com/?_from=R40&_trksid ... Categories</a><!-- m -->

on my 84 i will do it on the center stand......not the left side stand?

ty
Reply
#16 03-24-2011, 11:41 PM,
Always available on Ebay.

http://cgi.ebay.com/ebaymotors/Starter-r...ccessories

Yes indeed on the 1200 there is no danger of losing the gear and chain as there is a nylon guide in the rear cover to prevent this. The 1000 and 1100's only had the issue of having to lean the bike hard over to the left to stop that gear from falling out of place.
'RIDE TO BE SEEN' :d

Most common quote from a cager after killing a motorcyclist.

"I never saw him" instead of "I never looked for him".
Reply
#17 03-25-2011, 09:19 AM,
Thanks Guys
Reply
#18 03-26-2011, 11:13 AM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Starter stays engaged...now no power at all...gl1200 LTD nfldr 3 426 07-21-2011, 08:51 PM
Last Post: nfldr
  Remanufactured starter for 1984 GL. robdavspa 2 401 11-11-2010, 12:13 PM
Last Post: bs175dths
  GL1200 starter--- $20.00 per brush? is this normal? Dave-85-LTD 13 1,014 07-24-2010, 12:13 PM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html