GL1200 GOLDWINGS › TECH CENTER › LIGHTING AND ELECTRICAL v
1985 ltd wiring

Thread Rating:
  • 4 Vote(s) - 2.75 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1985 ltd wiring
turtle Offline
Member
***
 		Posts: 4
Joined: May 2007 Location: Bike: 
Does anybody know if the three yellow wires in the separate plug at the regulator are the same three down by the battery comming from the stator.I wanted to run new wires but wanted to check first.

Barry
Have a 1985 goldwing LTD
Reply
#1 06-03-2007, 02:24 PM,
admin Offline
Administrator
*******
 		Posts: 7,880
Joined: Jan 2006 Location: Leamington, Ontario Bike: 1984 Aspencade/yellow with black trim
They should be the same wires. If you want to be sure stick a pin in them and check them for continuity with a VOM.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com
Reply
#2 06-05-2007, 11:48 AM,
SIR tricky Offline
WISE AND HELPFUL MODERATOR
******
 		Posts: 4,305
Joined: Dec 2006 Location: Waterford, Ontario Bike: 1985 Aspencade, Satellite Blue
On the Ltd it seems that there is a separate 2 pin plug for two of the three yellow wires going to the regulator.

Only going by the schematic, I havnt seen one in the flesh so to speak Smile

[Image: gl1200L.jpg]
The only stupid questions are the one's that are not asked.
Reply
#3 06-05-2007, 12:36 PM,


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html