Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
engine swap-no fire (cdi specs)
I changed my bike from an Interstate to an Aspencade a few years ago. I MADE sure I got all the harnesses and parts I needed, (still need 1 relay). I changed the fairing to an Aspencade fairing with digital dash (came complete with fairing wiring harness), changed the complete frame wiring harness and everything works fine except for one tailight sensor.

I actually am considering changing my carbureted GL1200 to a fuel injected engine, but the thing is you will need everything to make sure it runs properly. I would carefully go through the wiring diagram and see what differences there are between the two bikes. You need to make sure you have all the modules and sensors needed to make the fuel injected engine run properly. I would think the CDI and many other modules would be different from a carbureted to an injected wing, but it's best to cross-check part numbers to be sure.

Best wishes.
Don W., Winchester, KY
Reply
#4 04-23-2010, 07:18 AM,


Messages In This Thread
engine swap-no fire (cdi specs) - by Guest - 04-22-2010, 10:00 PM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 06:26 AM
Re: engine swap-no fire (cdi specs) - by admin - 04-23-2010, 07:11 AM
Re: engine swap-no fire (cdi specs) - by dwitgoldwing - 04-23-2010, 07:18 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 08:18 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 08:34 AM
Re: engine swap-no fire (cdi specs) - by admin - 04-23-2010, 09:24 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 09:39 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 01:30 PM
Re: engine swap-no fire (cdi specs) - by admin - 04-23-2010, 02:21 PM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 08:11 PM
Re: engine swap-no fire (cdi specs) - by roscoepc - 04-24-2010, 12:13 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-24-2010, 08:22 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-24-2010, 09:53 AM
Re: engine swap-no fire (cdi specs) - by admin - 04-24-2010, 11:34 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-24-2010, 08:48 PM
Re: engine swap-no fire (cdi specs) - by Guest - 06-13-2010, 08:59 AM
Re: engine swap-no fire (cdi specs) - by admin - 06-13-2010, 11:06 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html