Thread Rating:
  • 8 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear splines
I think last time I greased the fingers (two years ago) I put the Honda moly grease on the fingers and put it together. I don't think I understood to glob a bunch of grease into the bushings. So most of the grease was probably not in the bushing but at the top which would be why it looks like the grease got spun to the edges. This time I pushed a healthy glob of grease into the bushing and when I put the fingers in, it took some rocking back and forth as the grease got pushed farther down.
While I had the rear wheel off I decided to rebuild the rear caliper, including new pads, two new pistons and a speed bleeder. All back together and working great.
[Image: VisitedProvincesMap.jpg]
[Image: VisitedStatesMap_zps8229ee64.jpg]
Reply
#46 05-12-2012, 02:08 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear wheel splines failed garyft 7 532 08-02-2010, 06:18 PM
Last Post: bluewing
  MOLY 60 PASTE FOR LUBING SPLINES admin 22 1,764 08-23-2008, 08:16 PM
Last Post: Guest
  Be sure to grease those splines!!! 4evermetric 3 666 12-19-2007, 10:10 AM
Last Post: floridawing

Forum Jump:


Users browsing this thread: 2 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html