Thread Rating:
  • 3 Vote(s) - 2.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Starting Fluid
I don't see any reason not to use it, but I think you are doing more harm than good in starting it & only running it til it comes up to operating temp. It will build up moisture in the exhaust & engine unless you run it long enough that the exhaust gets hot enough to evaporate all moisture out of it. You would be better off putting some Staybil or Seafoam in the gas, run it til it gets in the carbs, pull the plugs, oil the cylinders, reinstall the plugs, disconnect the battery & leave until spring.

Poorboy
Reply
#2 12-12-2009, 06:35 PM,


Messages In This Thread
Starting Fluid - by ccdouble - 12-12-2009, 05:52 PM
Re: Starting Fluid - by Guest - 12-12-2009, 06:35 PM
Re: Starting Fluid - by Keener - 12-12-2009, 07:35 PM
Re: Starting Fluid - by ccdouble - 12-13-2009, 07:47 AM
Re: Starting Fluid - by ccdouble - 12-13-2009, 07:51 AM
Re: Starting Fluid - by roscoepc - 12-13-2009, 08:40 AM
Re: Starting Fluid - by admin - 12-13-2009, 02:36 PM
Re: Starting Fluid - by Guest - 12-14-2009, 11:44 AM
Re: Starting Fluid - by admin - 12-14-2009, 07:13 PM
Re: Starting Fluid - by Guest - 12-16-2009, 04:05 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html