Thread Rating:
  • 4 Vote(s) - 3.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Broken fuse dog-bone fuse carriage / battery connector
glhonda Wrote:The red wire in the schematic for the clock is a memory circuit. Did the clock lose power and reset to 12, or did it just not function? The clock doesn't work without the key (ignition) on.

Before my clock died it used to display the numbers all the time, but, maybe that's part of why it died.
Ed (Vic) Belanger - 1954-2015
Founder of

#16 08-07-2009, 05:09 PM,
On my 1984 Aspencade, the clock displays numbers all the time. I think this is normal.
#17 08-09-2009, 10:42 AM,
That's what Keener reports also. What I can't figure out, is why they require four wires (including an ignition source) if the clock is constantly on with battery voltage. One battery, one ground, one illiumination, and one ignition. Hmmmmm
#18 08-09-2009, 01:30 PM,
Just a guess, but possibly, one for memory, one to power the clock, one for light and one for ground.
Ed (Vic) Belanger - 1954-2015
Founder of

#19 08-09-2009, 02:09 PM,
admin Wrote:Just a guess, but possibly, one for memory, one to power the clock, one for light and one for ground.
Just my point, Vic. If it is powered all the time (off the memory circuit) why would it need another wire to power the clock?
#20 08-09-2009, 02:48 PM,
Perhaps there's one circuit for the digital display driver and another circuit for the memory but I'm only guessing.
Ed (Vic) Belanger - 1954-2015
Founder of

#21 08-09-2009, 05:02 PM,
I've got the clock wiring circuits open right now and it appears that the green wire is ground and the red wire is for the clock memory and LCD number display and the other 2 wires are for the green light bulb that lights the clock display in the dark.
Ed (Vic) Belanger - 1954-2015
Founder of

#22 09-12-2009, 01:42 PM,
Taking this clock discussion to a new post. The two wires do not operate the illumination. Only the Br/W.

<!-- l --><a class="postlink-local" href="">viewtopic.php?f=55&t=7357</a><!-- l -->
#23 09-12-2009, 08:39 PM,

Possibly Related Threads…
Thread Author Replies Views Last Post
  Accessory Fuse Panel addition PanMan75 6 1,836 04-17-2014, 05:12 AM
Last Post: GWdan
  Looking for information on the 1987 Fuse block and e.t.m pdf charlainec 3 804 11-21-2012, 12:35 AM
Last Post: charlainec
  Fuse Box Diagram goldamator 3 828 10-20-2012, 10:31 PM
Last Post: goldamator
  fuse panel legend gunny 3 1,058 09-11-2011, 04:04 PM
Last Post: SIR tricky
  84 Aspencade Fuse keeps blowing 4 1,393 12-22-2010, 09:42 PM
Last Post: SIR tricky
  Location, In Line Turn Signal Sub Fuse, 84 A 1 773 08-18-2010, 08:31 PM
Last Post: Guest
  30 amp spade fuse holder SIR tricky 4 1,208 07-29-2010, 11:32 AM
Last Post: neoracer
  Main fuse Plug Melted 7 973 09-18-2008, 06:25 AM
Last Post: Guest
  Keeps on blowing a fuse Oldman 5 1,156 07-01-2008, 10:24 AM
Last Post: Oldman
  Auxiliary Fuse Panel GoneForTheBorder 7 1,433 03-31-2008, 12:17 AM
Last Post: GoneForTheBorder

Forum Jump:

Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html