Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
fork oil question
I replaced my fork seals,

I used 10 weight fork oil and the forks feel way too firm for me.
Is 10 weight too heavy?

#1 11-29-2008, 12:58 PM,
10w fork oil or Dextron ATF is what the manual calls for Jim. What you might be experiencing is just how the suspension is supposed to react or the TRAC settings might be too stiff. Mines set at 2.
1985 Limited Edition
#2 11-29-2008, 01:17 PM,
Agreed, 10w is just about what ATF is.

I use 15W Belray and Progressive springs with very little air and the feel fine to me.
I weigh in at 185lbs and keep my tire pressure at 34 which is 2 lbs higher than what the manual calls for but a lot softer than what heavier people set it at.
The only stupid questions are the one's that are not asked.

#3 11-29-2008, 03:12 PM,
I bet I just got used to the soft ride from the lack of oil in the forks before.
There was only about 3 oz. in esch side.

rode like a cadillac though
#4 11-29-2008, 03:40 PM,

Possibly Related Threads…
Thread Author Replies Views Last Post
  Stock fork spring question Frank 8 3,060 07-14-2013, 08:24 PM
Last Post: Frank
  Replacing fork seals, got a question 4 1,874 09-11-2010, 07:55 PM
Last Post: arkansassuperdrafter
  Question about fork tubes floridawing 10 3,182 07-19-2010, 10:01 AM
Last Post: zg1286
  Fork oil question bamf_shadow 4 2,256 01-21-2007, 08:45 AM
Last Post:

Forum Jump:

Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html