Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Master cylinder leak
I changed the plastic covers on both sides to chrome cylinder covers. The front brake master cylinder started to leak after I did that so I got a new seal. It still leaked. It didn't leak until I changed the ugly plastic to chrome. Am I going to have to put the ugly plastic back on or could someone suggest a solution? :? Thanks. Tongue




_______________________________________
'84 Interstate Trike & lovin' every minute of it!
Reply
#1 11-10-2008, 05:02 AM,
If you use the factory rubber and plastic inserts, the chrome covers will leak for sure. I couldn't figure out where an oily mist was coming from. Now I know and have gone back to the stock covers.
Reply
#2 11-12-2008, 02:05 PM,
Plastic? are they not aluminum? Maybe I'm thinking of different things or maybe I am wrong.

If I am right then remove the lettering and polish the aluminum.
The only stupid questions are the one's that are not asked.

Reply
#3 11-12-2008, 02:56 PM,
My interstate came with the chrome aftermarket covers which, while they don't leak send a nasty bright sun reflection directly into my eyes whenever I travel at a certain angle to the sun. I decided they were going to be matt black next season for sure. I hate stuff that interferes with my concentration. I have a hard enough time focusing my attention for more than a few seconds as it is. I'm pretty sure my school report cards almost always contained the term "easily distracted".
Tim Johnson
1984 GL1200I
1975 GL1000
2002 GasGas trials.
1956 Norton Dominator
Reply
#4 11-12-2008, 03:33 PM,
The stock covers are plastic. There wasn't any kind of insert, just the seal. I had a friend tell me to get some hi-tac and clean off the seal, the chrome cover and the lip. Spray a light coat on the seal and when it gets sticky put the seal back in. If that didn't stop it, have the stock plastic ones chrome coated. Any thoughts on that?
Reply
#5 11-12-2008, 08:00 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear master cylinder Patvail 0 129 07-13-2021, 05:14 PM
Last Post: Patvail
  Master Cylinder Sight Glass Replacement Roleketu 4 1,503 10-13-2013, 06:01 PM
Last Post: Wingnoob
  Master Cylinder sight glass 18 3,441 06-07-2013, 06:49 PM
Last Post: Frank
  Master Cylinder Rebuild Kits wildhorse 5 908 05-23-2012, 03:03 AM
Last Post: PanMan75
  Front Master Brake Master Cylinder SIR tricky 15 3,141 01-30-2012, 07:40 PM
Last Post: seabee
  Rear Master Cylinder Boot - how do you fit it? sheridat 3 745 01-26-2012, 10:16 PM
Last Post: seabee
  To Fix a Leaking Master Cylinder Cover...or not desertrefugee 6 1,157 11-21-2011, 07:22 PM
Last Post: desertrefugee
  rebuilt calipers - now master cylinder problem 861200GW 5 868 03-19-2011, 06:09 AM
Last Post: unionjack
  brake master cylinder arkansassuperdrafter 1 500 06-06-2010, 03:44 PM
Last Post: arkansassuperdrafter
  Brake Caliper/RR Master cylinder exploded view 6 975 05-01-2010, 05:28 AM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html