turn signal problem

[jkredwing]

I have the odd prob with turn sigs on my "new" 86 1200i. No dash indicator or rear lights. Just the front with no flash and opposite side lighting up.I cant turn it off, just switch sides. Ok I tried to locate the turn sig flasher/relay like recomended. After much time spent,I cant find it. thats because its not there! I did find the plug with the correct color wires going to it. So I was wondering if anybody knew the part # for this relay so I can start hunting locally for it. I don't think its the same as the hazard flasher as the schematics are different. Any help would be appreciated. Thanks.

[jkredwing]

OK I took the hazard flasher and plugged it in to the turn socket and the turn signals work fine so I guess they are interchangable. Now just find a new turn flasher and everything will be working. I've been told any automotive flasher will work. Maybe I'll try that.

[neoracer]

both flasher are the same and i can send the # if u really want but it will cost you about $50
if u can find it. will be a factory order. U might try one of the people off ebay who sell Goldwing parts. Your best bet is to replace the factory wing connector with an auto stype plug and then u can use a 552 from them on or a EL52N(electronic) which are readily available anywheres
7 dyas a week email me your # and i'll call if you need further info...i posted this info in the site
last week to someone flasher problems so u can check there also

[jkredwing]

Hey thanks for the info. I'm heading to NAPA right now. Alsowaiting for fuel pump, should be here today. Wifes B-day, we are gonna get it off the trailer and ride! I think I've got all the little bugs out, I guess we'll find out. Thanks again, this is a great site!