How to post your pictures

[admin]

First go here; <!-- m --><a class="postlink" href="http://www.imagecave.com/">http://www.imagecave.com/</a><!-- m --> and sign up. It's free.

Then follow the instructions. You need the URL that starts with EZCode.

Copy that EZCode line and come back here and paste that link in your post, your pictures should now be in your post.

It's that easy.

If you have problems figuring out how to post your picture link here email me at <!-- e --><a href="mailto:goldwinger1984@yahoo.com">goldwinger1984@yahoo.com</a><!-- e --> and I'll try to help.

[Guest]

[ronsena]

<!-- m --><a class="postlink" href="http://usera.imagecave.com/ronsena/1985_Goldwing_GL1200_Aspencade/IMG_0093.JPG">http://usera.imagecave.com/ronsena/1985 ... G_0093.JPG</a><!-- m -->

[admin]

To get the following picture all I did was copy this link:
EZCode:http://usera.imagecave.com/Victorious1/r...detail.jpg
from Image Cave and pasted it here.

[dalph07]

<p>
here it is, a 1985, blue GL1200 Aspencade

used the following code:
<!-- m --><a class="postlink" href="http://www.baldeaglenest.com/images/100_1923a.JPG">http://www.baldeaglenest.com/images/100_1923a.JPG</a><!-- m -->
with the [img]and[/img].....
I vill get it right no matter how many times ve try!!!!;-)

[admin]

Keeps saying that page cannot be found.

[dalph07]

Keeps saying that page cannot be found.

Got it!!!! 8) 8)

[admin]

Nice looking 1200. Glad you got the pic thing working,

[dalph07]

Thanks, that was the day I brought her home. Since, I've changed the windshield, put on Air Horn, forward foot pegs, removed the drivers back rest (so mama can have more room and I can get on/off easier), taken off PO's car crusie control he added which was rusted out and ah-h-h!? Hum. I guess that is all for now that I've done. Was taken good care of by the PO's.

Only other things are: the side stand where the extension goes, the bolt broke off inside the hole and cant get the chrome extension on yet; Have a very slow leak above my left toe (raidator fluid) but have O ring and gasket to fix that. I'm just not sure about where to drain the raidator fluid from before I remove bolts to replace O ring; the seat is stock and after a couple hundred miles the seat causes your butt to hurt (have gel pads to help correct that).

[dalph07]

Drain for the anti-freeze is on the front of the engine. Right below the lower radiator hose on the water pump. Its a small bolt with a brass gasket. Pull the radiator cap and it will drain faster.

Thanks for the reply. I'm just waiting for a halfway decent weekend to get it done.

[Guest]

No problem. Glad to help.

[Guest]

My Baby : at 140,000, and still going strong :


and it looked more or less like this, as it entered Alaska!!... well a little dustier, maybe ...

[dorst356]

Just playing to see if pic will come up. Guess it works in preview. 1984 GoldwingA 53000 miles.

[SIR tricky]

Here is a copy of the above picture @ 640 X 480 pixels or pretty close to it.

When posting jpg's it does make it easier to view them if they are a reasonable size.

Although I did get to use my mouses left right scrolling feature for the first time

[Guest]

Thats one of the reasons I like my Opera browser. It has a little fit to width feature that will play with the page and image size so it all fits on one page. It dose sometimes a page a weird feel, but not to often.