Thread Rating:
  • 5 Vote(s) - 2.4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Driving Lights Recommendations and Installation Procedures..
Well I thought I would start a new thread on Driving Lights.

Vic has convinced me to go with the Sylvanias on the headlight now I would like too see what you all do when you add driving lights.

Particularly how to install them properly. Indeed I read "get a relay" and use it.....but someone needs to spell it out for me. Which one? where obtained? Where do you put it?

I am good with electronics so if there is an installation schematic that would be MOST helpful. Tricky????

Also recommended lamps and wattage vs. lumen pros and cons as well.

I have cruised the internet and find a wide variety of lamps and pricing. I see some on sale at Harbour Frieght for only $9.00 a pair!

What type of mounting hardware do you improvise with?

Best location top of the engine guards?

Give me the 101~~~!!!

Thanks.
Reply
#1 10-31-2007, 04:14 PM,
20 amp relay should be fine
from your local auto store
20 amp fuse from your battery for the main power.

The Accessory terminal is already fused and you wont be using much power to switch the relay

[Image: drivinglight_wiring_diagram.jpg]

I would try and get them as high as possible, if they would work close to the ground, thats where Honda would have put the headlight Smile

Several ways to put them on,

Simple brackets, like these:

Driving Light Bar Brackets

AN-993-114 not SE, LTD, 87 Asp.

<!-- m --><a class="postlink" href="http://www.chrometoys.com/36.html">http://www.chrometoys.com/36.html</a><!-- m -->

or

<!-- m --><a class="postlink" href="http://www.jcwhitney.com/autoparts/Product/tf-Browse/s-10101/Pr-p_Product.CATENTRY_ID:2003522/p-2003522/N-111+10211+600014808/c-10111">http://www.jcwhitney.com/autoparts/Prod ... 08/c-10111</a><!-- m -->

like this:

<!-- m --><a class="postlink" href="http://www.gl1200goldwings.com/viewtopic.php?t=1749">http://www.gl1200goldwings.com/viewtopic.php?t=1749</a><!-- m -->
The only stupid questions are the one's that are not asked.

Reply
#2 10-31-2007, 07:25 PM,
I used the electrical hookup that Tricky outlines above and the JC Whitney light bar in Tricky's links and I find they work great. The lights that I use are black, not chrome, as I trim my bike in black to accent the yellow paint. The lights are 55 watt each, compact, wide beam spread so I can see animals on the side of the road at night which I can't see with the stock headlight plus these lights extend the low beam headlight distance by about 50 feet. Note: Tricky had big lights on this same light bar and it broke off so keep the lighting weight load on the light side. One big advantage of using this light setup is that it gets the lights up high which gives much better lighting over a distance than mounting the lights down low.

[Image: DSC05387629x508.jpg]
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#3 11-01-2007, 08:34 AM,
Smart thinking Angela, I installed a plug on mine as well to make repairs much easier if I ever need to remove the lower fairings for servicing. I sure don't regret installing those driving lights as they as life savers for night driving. Big Grin
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#4 11-05-2007, 07:22 AM,
I see those small lamps similar to what Vic has are at Princess Auto at $24.99
in this months flyer.
Whether they are the exact same I dont know.
The only stupid questions are the one's that are not asked.

Reply
#5 11-05-2007, 07:55 AM,
tricky Wrote:I see those small lamps similar to what Vic has are at Princess Auto at $24.99
in this months flyer.
Whether they are the exact same I dont know.

That's a deal if they are the same. When I got mine at Princess Auto they were $49.99 They sure kick out the light for such a small enclosure.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#6 11-05-2007, 07:44 PM,
Tropi: I added driving lights to the engine guard of my wing and do they ever light up the road,
I used a lighted switch without a relay, I don't see the point of using a relay if you don't have to.
If you use the accessory terminals you can still fuse the lights lower if required without any relay in the circuit, and the lighted switch on my dash lets me know at a glance that the lights are on or not.
Redwing 1984
If everybody subscribed to the theory of an eye for an eye, the world would eventually be blind.
http://usera.imagecave.com/redwing1984/
Reply
#7 11-05-2007, 08:36 PM,
On sale at Princess Auto till the 11th November.

[Image: horns.jpg]

[Image: lights.jpg]
The only stupid questions are the one's that are not asked.

Reply
#8 11-05-2007, 08:40 PM,
Thanks for the tip on the lights.

Has anyone used those air horns?
I would like a loud set Confusedhock: , but I dont want something that sounds like a sick cow. :oops:
Reply
#9 11-06-2007, 03:32 PM,
Buzzsaw has some darn loud ones on his 87---I'd love to have had those today when a cager tried to merge on to me :twisted:
Tim
currenlty own
Car, truck, and bicycle :)
formerly owned
86 SEI,83GL 650i,82GL 500i
450 nighthawk, german spec CB 650, KZ 100, YZ 125, CT90
http://catman01.webs.com/
Reply
#10 11-06-2007, 05:48 PM,
BearOnt Wrote:Thanks for the tip on the lights.

Has anyone used those air horns?
I would like a loud set Confusedhock: , but I dont want something that sounds like a sick cow. :oops:

I use a pair I got from Princess auto a few years ago, they do give a nice sound.......... what does a sick cow sound like....?
The only stupid questions are the one's that are not asked.

Reply
#11 11-06-2007, 05:56 PM,
BBBAAAAAWWWWWWLLLLLLLLL :lol:
Reply
#12 11-07-2007, 01:59 PM,
Mine don't sound quite this loud;

<!-- m --><a class="postlink" href="http://www.youtube.com/watch?v=ogBHm8l2MHw">http://www.youtube.com/watch?v=ogBHm8l2MHw</a><!-- m -->
The only stupid questions are the one's that are not asked.

Reply
#13 11-08-2007, 02:15 PM,
Okay Tricky that a good-- I don't know why but it was also sure funny :lol: I guess I was just picturing the faces of the drivers next to me --If held on to a good blast like that Big Grin
Tim
currenlty own
Car, truck, and bicycle :)
formerly owned
86 SEI,83GL 650i,82GL 500i
450 nighthawk, german spec CB 650, KZ 100, YZ 125, CT90
http://catman01.webs.com/
Reply
#14 11-08-2007, 06:58 PM,
Hello Vic and all riders---Here is a pic. of my lights. I got them from JCW for $22.00 for the hole set up, wiring ,switch. The add for the lights said they were 55 watt bulb but after tearing one apart ,I foune thet were 50 watt bulbs. They put out a lot of light. I also bought the light bar from them. I well try to post a pic. Chuck[Image: 1873029.jpg]
Reply
#15 02-01-2008, 06:07 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Power for Driving Lights tgsguitar 11 1,772 05-24-2012, 06:37 PM
Last Post: SIR tricky
  LTD Cornering Lights - driving lights - always on or not? sheridat 10 1,673 11-26-2011, 04:12 PM
Last Post: neoracer
  Good source for replacement driving lights 26cowboy 10 1,458 08-06-2011, 04:49 AM
Last Post: turbodieseli4i6
  driving lights daljaz 4 962 02-24-2011, 08:37 PM
Last Post: neoracer
  Troubleshooting driving lights wingandaprayer 3 712 05-17-2009, 07:34 AM
Last Post: neoracer
  HID Headlights vs H3 Driving Lights neoracer 10 1,840 04-14-2009, 10:59 PM
Last Post: neoracer
  Need New Driving Lights neoracer 5 1,123 04-14-2009, 04:47 PM
Last Post: neoracer
  $17 Walmart driving lights Keener 4 1,315 01-21-2009, 06:05 AM
Last Post: detdrbuzzard
  Driving lights installed. William_86 4 905 10-01-2008, 06:36 PM
Last Post: William_86
  Driving Lights 4 965 06-08-2008, 10:54 AM
Last Post: FatherWilliam57

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html