Wire size

[sailorchuck]

:? Hello-I,am new to this site. I hope some one here can help me out. After I install the poorboy kit,I would like to rewire all my extra lights to one switch. I well keep all the standard lights as they are stock. What size wire should I use for the rest of the lights. Thanks Chuck

[William_86]

Hello welcome to the site. im new too

take a look at this site:

<!-- m --><a class="postlink" href="http://goldwingtech.info/auxwiring/auxpwrwiring.html">http://goldwingtech.info/auxwiring/auxpwrwiring.html</a><!-- m -->

its a great setup, the guy explains whats everything for and the wire gauges too

good luck and ride safe.

ps. you installed the poorboy yourself? how hard was it, hows it working?, do u have some photos you can share ?

[roscoepc]

Looks like William_86 fixed Ya up with what you need!

Just remember. You've only got so much power to play with as far as adding extra lights. What I've seen most people starting to use is LED's instead of regular light bulbs because of power savings.

Others should be along shortly with more suggestions!!

Welcome to the site!!!!!

[sailorchuck]

I ordered 2 led lights #1157 to try in the rear stop and marker light. They would not work. The base of the bulb is to large to fit the socked. I tried to cut down the socket as far as I could so it would stillsrew into the housing. Still would not work and even if it did ,you would have to cut the housing larger. The onlg thing that would work would be the clucter type led. That is why I,am going to do the poorboy set up.