Login

fly5465 · #16 09-26-2007, 09:54 AM,

Jim,
I'll take 2 bulbs as well. By the way what is a "4 LED 1 Flux bulb". I imagine it has 4 LED per bulb, but I'm not sure about the 1 Flux part. These will be as bright at stock but with much less power usage?

Thanks,

#17 09-26-2007, 01:32 PM,

It is a LED Bulb that has 1 super flux LED in the center firing forward and four around the sides that fire to the sides.
I have them in my 1200 they are white with a tinge of blue, kinda look like the new HID lights on the new cars.
they are as bright as the light that is stock for this postition

yiterp · #18 09-30-2007, 04:47 PM,

jim,
i'll take two of the BA9S 4 LED 1 Flux bulbs as well--e-mail me when you get them and i'll paypal you the funds <a href="mailto:yiterp45@yahoo.com">yiterp45@yahoo.com</a>

Orignalowner · #19 09-30-2007, 10:20 PM,

rvtechA1 Wrote:It is a LED Bulb that has 1 super flux LED in the center firing forward and four around the sides that fire to the sides.
I have them in my 1200 they are white with a tinge of blue, kinda look like the new HID lights on the new cars.
they are as bright as the light that is stock for this postition

Are these brighter than the #57 Big White LED you have on your site? Just hate removing everything just to replace two tiny bulbs

#20 09-30-2007, 10:22 PM,

yes they are brighter than the big white, big white has 1 chip and these have 5 that fire in all directions.

fly5465 · #21 10-01-2007, 07:24 AM,

Jim,
Let me know when you get these in and how much money I should send to you. Smile

#22 10-01-2007, 07:38 AM,

will do
Thank you

joed8562 · #23 10-01-2007, 10:26 AM,

Order me 2 as well, and let me know when they are in. I will probably order some LEDS for the Trunk too (87 Aspencade) I'll open it up and see what I need. Thanks for all your help!

fly5465 · #24 10-07-2007, 07:06 PM,

Thinking about these bulbs again..... (position lights, remember Smile

)

The original bulbs say they are 4 watt bulbs. I went down to the local parts store and bought an 1891 bulb. It is almost the same size and fits just fine, it says its 3.3 watts. I put it in the side that was not working and it looks just like the side that is working with the original bulb. Is there a problem running this bulb for a while, till I get the LED's?

P.S... Jim, and estimate on when you will have the LED's?

Thanks all.

#25 10-07-2007, 08:14 PM,

That bulb will be just fine,

Jim

#26 10-15-2007, 05:46 PM,

I have 6 pairs of the LED marker lights.

If you would like a pair let me know, they will go fast

Jim

fly5465 · #27 10-15-2007, 05:57 PM,

Hey Jim,
I got your PM also. Yes I will take a pair. Just let me know where to send the money.

catman · #28 10-15-2007, 06:00 PM,

Jim,
What's the price?

#29 10-15-2007, 07:03 PM,

These are $8.50 Per pair.

Thank you
Jim

fly5465 · #30 10-21-2007, 06:04 PM,

Here is an update... I received these new LED bulbs quickly from Jim (Thank!).

I put them in today and I have to say the Jury is still out for me. I will leave them in for a while and see if I like them. They are a bit more blue than I expected. However they are not as blue in real life as they appear in the pictures.

I dont think these position lights are much more than cosmetic. I think of them as kind of "mood" lighting... LOL :lol: Not sure if I like the "softer" mood of the originals, or the "blue" mood of the LED's

Here is a picture with just 1 changed. I'm sure you can tell which is the LED. Smile

Now both changed

[Image: new1.JPG]

Login
Username:
Password:	Lost Password?
	Remember me