Thread Rating:
  • 3 Vote(s) - 3.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring Diagram for T/S Converson Kit
Was wonderining if anyone could show me how to wire the T/S kit for my '84 GL1200A in the trunk?. PO had so many cuts and splices in the original wiring and the T/S's are not working and I just don't know were to start. Regular T/S work fine. A picture of how I should splice into the original wiring would really help!!!. Thanks in advance!!!.
#1 09-15-2007, 04:52 PM,
If your talking about the Add on kits for the trunk, if I am not mistaken there are two bulbs in there, If you want one bulb as a tail light wire up as shown if you want it as a brake light use the Green/Yellow wire. This you can wire up behind the light in the trunk.
For the turn signal I would run the wires down to where they come out of the rubber cover under the seat. as shown. The red dots denote a spade or bayonet connection, makes life easier if you need to take of the trunk.

Unless someone else can come up with a better idea.

[Image: brakelights.jpg]
The only stupid questions are the one's that are not asked.

#2 09-15-2007, 07:31 PM,
I just bought a kit for mine. Here are the instructions that came with it.

[Image: CCE00000.jpg]
#3 09-16-2007, 11:57 AM,
Thanks a bunch...exactely what I needed a wiring diagram and the actual instructions...what more can a person ask for!!!. This is truelly a great place for info and help. Thanks again. Mike
#4 09-18-2007, 03:01 PM,

Possibly Related Threads…
Thread Author Replies Views Last Post
  Fuse Box Diagram goldamator 3 779 10-20-2012, 10:31 PM
Last Post: goldamator

Forum Jump:

Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html