Thread Rating:
  • 2 Vote(s) - 1.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
84 Aspencade Carb parts - starter valve actuator
I started cleaning my carbs today. One of the starter valves was sticky causing the choke to very slowly disengage, so I took it apart to clean it. When I was reassembling the actuator, the threads stripped. Anyone know where I can get a replacement? Or will I have to buy a set of carbs off eBay? (Might not be a bad idea anyway...)

[Image: th_IMG_0272_zpsa0aa92f6.jpg]
#1 11-01-2014, 04:54 PM,
Crisis averted. Removing the lock nut to expose good threads and a little bit of blue thread lock and the nut is now secure.
#2 11-05-2014, 07:36 AM,
I have ALWAYS been a firm believer in attempting repair instead of just replacing.
I am glad it worked out for you.

I make it routine to open the cold start valve and add some lubricant/cleaner to help keep these valves working well.
I do the same with the linkage which activates them.

-Ride On
enjoying the view from the saddle....... due mainly to the people and information found within this site
#3 11-06-2014, 11:11 AM,

Possibly Related Threads…
Thread Author Replies Views Last Post
  84 aspencade carb issues tongy66086 2 2,436 12-29-2015, 12:21 PM
Last Post: bs175dths
  WANTED-VALVE SET, STARTER 16046-MG9-681 Roleketu 0 1,233 06-04-2014, 06:26 PM
Last Post: Roleketu
  Carb Removal 1985 Aspencade Frank 8 6,020 04-20-2013, 03:35 PM
Last Post: mancrypt
  Recommended vendor for carb parts Randakk Cycle wingandaprayer 3 1,870 11-14-2008, 02:37 PM
Last Post: William_86
  Obsolete carb parts 1oldfrt 3 2,059 06-01-2007, 04:50 PM
Last Post: 1oldfrt

Forum Jump:

Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html