Thread Rating:
  • 3 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GL1200 Ingition Switch
To All,
I have an 84 GL1200I and the Ignition switch is failing, I've read all about the recall on the switches; but taking it to a dealer would be a hassle, Has anyone wired up a push button start? Now I'm not electrically inclined, but it does not seem it would be that hard. I really do not need a key and I would like to eliminate the problem completely.

All advise is appreciated.

As always, Ride Safe.
Bodag
Reply
#1 08-18-2014, 12:15 PM,
I picked up a full lock set off of ebay It was off an 87 and it was the updated switch set.
It looked good in the pictures and has been working fine for me. The local stealer here said the switch was no longer available.
I do know others have gotten one from a dealer recently under the recall. ymmv
Andy
Silver 1984 Interstate
GWRRA WAO
Reply
#2 08-18-2014, 08:12 PM,
(08-18-2014, 08:12 PM)BigBro Wrote: I picked up a full lock set off of ebay It was off an 87 and it was the updated switch set.
It looked good in the pictures and has been working fine for me. The local stealer here said the switch was no longer available.
I do know others have gotten one from a dealer recently under the recall. ymmv

BigBro,

Thank You, Kinda figured!
Dealers won't touch these bikes with 10 foot pole!
I'll start surfing the inter-web.

Thanks again,
Bodag
Reply
#3 08-19-2014, 03:46 AM,


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html