Thread Rating:
  • 6 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Re-assembly questions
Thanks for the reply...I know the orientation of how things are supposed to go, it's just that they weren't going together well.

The carbs are finally re-assembled, but I would like some guidance on the fuel supply.

Attached is a picture of my setup. I could not find the right size fuel hose so I used 1/4". Works fine for all of the applications except for the supply to #4. The larger hose doesn't bend as easily, but so it looks like it is over-flexed on the carb connection. My biggest concern is that the hose runs right along the throttle linkage. I'm worried that the repeated throttle action will eventually erode right through the hose. Any suggestions on what I could use for a chafing guard? I''ve thought of electrical tape, but that would look as nice and is not as durable.

Note: I have since moved the left-side T-clamp to the carb connection. I think it will work, but need to guard the fuel hose before I install.


Attached Files Thumbnail(s)
   
Reply
#4 06-23-2014, 08:23 PM,


Messages In This Thread
Re-assembly questions - by pstelter - 06-22-2014, 12:43 PM
RE: Re-assembly questions - by pstelter - 06-22-2014, 06:49 PM
RE: Re-assembly questions - by Roleketu - 06-23-2014, 03:30 PM
RE: Re-assembly questions - by pstelter - 06-23-2014, 08:23 PM
RE: Re-assembly questions - by bs175dths - 06-24-2014, 02:27 PM
RE: Re-assembly questions - by pstelter - 06-26-2014, 07:20 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html