Poll: Should I photograph my carb rebuild step by step and post it here
You do not have permission to vote in this poll.
Yes
100.00%
4 100.00%
No
0%
0 0%
Total 4 vote(s) 100%
* You voted for this item. [Show Results]

Thread Rating:
  • 3 Vote(s) - 2.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Time for a Carb rebuild
Looks like I am going to have to pull the carb rack and do a rebuild.

If anyone thinks I should I will photograph the whole procedure step by step and post them here.

any thoughts??

Jim
Reply
#1 08-01-2007, 11:40 PM,
O well,

I pulled the carb rack this morning,

found 1 Float valve frozen shut on the left bank,
this carb was completely trashed, very dirty.

and one open on the right bank.

the rest of the carb interiors looked great, diaphrams were good, floats and hardware is in great shape.

more later.
Jim
Reply
#2 08-02-2007, 08:08 AM,
Posting step-by-step pictures would be a great help to those members who would tackle such a job. Unfortunately, I'm not one of them.
Reply
#3 08-02-2007, 11:24 AM,
I am one who would, it would be helpful to see the pics, I hope I am not the only one who would like to see them, it is a lot of work to take the pics and post them.
Ride safe have fun and enjoy. Lane
1985 Aspencade
2002 Vulcan
Reply
#4 08-02-2007, 08:45 PM,
Hi Jim, I've been away on vacation and just got to see you invitation now. I think that it would be great to see some step by step close up pics that we can use as a reference on this site. I look forward to seeing them laid out here.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#5 08-05-2007, 05:20 PM,
It will be done...

Thanks
Guys

Jim
Reply
#6 08-05-2007, 05:50 PM,
Show them dirty and clean Jim.
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#7 08-06-2007, 11:18 AM,
Hi Jim;
I'm new to the forum and membership but I have this precise problem with my 86 Aspy and I'm looking to rebuild my carbs. I have been unable to get my Wing to idle without the choke engaged. I have tried running carb cleaner through the gas lines but it has only marginally inmproved. It would certainly help me to view pictures of your successful efforts. Are you buying aftermarket rebuild kits or will you wait until you tear them down to buy specific replacement parts and seals? Any recommendation where best to get the parts? I have both the Clymer's and Honda Shop Manual to refer to but your real-world experiece is probably invaluable and far more detailed. Thanks for your help on this.

Bill
Reply
#8 08-26-2007, 12:44 PM,
I will start adding the first pictures and info tonight, I am posting the pictures to imagecave now.
Reply
#9 08-26-2007, 02:14 PM,
It's too bad you couldn't hold off for Randakk's carb kit due to come out November 1st. My carbs are showing signs of needing attention and as soon as I can get my hands on Randakk's kit I'm tearing my carbs down and rebuilding them. Big Grin
Ed (Vic) Belanger - 1954-2015
Founder of gl1200goldwings.com

Reply
#10 08-26-2007, 03:59 PM,
Jim & Admin;
Thanks for the propmt responses! I appreciate the pictures and will be looking forward to monitoring the rebuild process. What is the link to imagecave ... <!-- m --><a class="postlink" href="http://www.imagecave.com">http://www.imagecave.com</a><!-- m --> ? I know this is work to document this carb-rebuild process but I think you will be really surprised at the level of interest this will generate. Unfortunately, carburetor-fouling is one of the weak design points of the GL1200, particularly if it is not a daily-rider.

I am not aware of the Randakk carb rebuild kits? Are these special to the GL1200? How do/will they differ from the Goldwing OEM parts or the K&L Kits? I have been considering picking up a used 86 Aspy carb set that is in good running condition (if I can find one at a reasonable cost) to use while I tear down my carbs and rebuild them. I woud reinstall my carbs after they are rebuilt and resell the extra set. Does anyone know if the 86 Aspy and the 87 Aspy carb sets are interchangeable? I know there is a difference between the 84/85 carb sets and the 86/87 carb sets ... different vaccuum hose arrangements, but I'm not sure if the 86 and 87 are truly interchangeable? If I can pick up the extra carb set, it may be November 1st by the time I get to rebuild the ones off my bike. Tell me more about the Randakk carb kits or point me to their website. I definitely appreciate everyone's collective wisdom on this topic.

BTW Jim, I'm not there yet but I will be interested in the GL1200 LED conversion kits at some point. I'll check out your website.

Thanks, Bill
Reply
#11 08-26-2007, 06:47 PM,
Thank you Bill.

Yes the imagecave address is correct.

Im not sure at all about the interchange you spoke of.

Randaks site is here: <!-- m --><a class="postlink" href="http://www.randakks.com/">http://www.randakks.com/</a><!-- m -->
But I dont think his 1200 kits are ready yet.
When They are Im sure they will be the best.

The rebuild process can be done easily on one Saturday or day of your choice.

These are great carb kits, not the best maybe but they should last the life of the bike.

the stock parts lasted 22 years!!


<!-- m --><a class="postlink" href="http://cgi.ebay.ca/HONDA-GL1200-K-L-CARB-KIT-1984-1985_W0QQitemZ280140518117QQihZ018QQcategoryZ35597QQcmdZViewItem">http://cgi.ebay.ca/HONDA-GL1200-K-L-CAR ... dZViewItem</a><!-- m -->

<!-- m --><a class="postlink" href="http://cgi.ebay.ca/HONDA-GL1200-INTAKE-MANIFOLD-O-RINGS-1984-1987_W0QQitemZ280141428312QQihZ018QQcategoryZ35597QQcmdZViewItem">http://cgi.ebay.ca/HONDA-GL1200-INTAKE- ... dZViewItem</a><!-- m -->
Reply
#12 08-26-2007, 07:31 PM,
YES YES YES YES PLEASE!!!!!!!! Big Grin GOOD LUCK DUDE
85' GL 1200 Interstate - My Picture Thread
[Image: signaturebg4.jpg]
Reply
#13 08-26-2007, 08:05 PM,
View Carb rebuild here....

<!-- m --><a class="postlink" href="http://gl1200goldwings.com/viewtopic.php?t=1395">http://gl1200goldwings.com/viewtopic.php?t=1395</a><!-- m -->
Reply
#14 08-26-2007, 08:16 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Carb Rebuild marksaunders 12 2,033 05-17-2014, 02:24 PM
Last Post: marksaunders
  84 1200 carb rebuild kywinger 1 598 04-25-2013, 02:39 PM
Last Post: bs175dths
  Carb still pops after rebuild 5 1,146 10-23-2011, 04:49 PM
Last Post: MRGONE
  carb rebuild arkansassuperdrafter 4 640 09-14-2010, 01:27 PM
Last Post: bs175dths
  Carb Rebuild - Special Tools or Tips? scty_p 3 644 09-08-2009, 01:17 PM
Last Post: Guest
  1985 GL1200 Carb. Rebuild 49 7,943 08-04-2009, 01:19 PM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html