Thread Rating:
  • 3 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Master Cylinder Sight Glass Replacement
I finally got around to changing the sight glass on the clutch master-cylinder. I ordered two sight glass replacements from New River Cycle Salvage. It was quite an easy fix. The hardest part was getting the old OEM yellow glass out, without gouging the metal or popping out the metal washer. Once all the old material was out, I used brake cleaner, let it dry. Then a small bead of clear Permatex RTV. Use a piece of masking tape to hold in place and dry for 24 hours. Next day fill and bleed clutch and bingo, I can now see if the fluid is low. Here's a couple of photos, one of the brake cylinder with the old OEM yellow'd glass, and the clutch with the new glass installed.


Attached Files Thumbnail(s)
       
[Image: VisitedProvincesMap.jpg]
[Image: VisitedStatesMap_zps8229ee64.jpg]
Reply
#1 08-21-2013, 09:04 PM,
I used them a couple of years back for mine as well. I did the brake. They had it to me in Jersey in 2 days no extra change. Real easy fix too. I just wish I did the clutch also, it's starting to look beat as well. Nice to have glass in there....
Mike                  
'84 Aspencade                                      
*Poorboy Conversion                              
* Bed-liner Black                                    

North Jersey Motorcycle Group
Reply
#2 08-22-2013, 05:20 AM,
(08-21-2013, 09:04 PM)Roleketu Wrote: I finally got around to changing the sight glass on the clutch master-cylinder. I ordered two sight glass replacements from New River Cycle Salvage. It was quite an easy fix. The hardest part was getting the old OEM yellow glass out, without gouging the metal or popping out the metal washer. Once all the old material was out, I used brake cleaner, let it dry. Then a small bead of clear Permatex RTV. Use a piece of masking tape to hold in place and dry for 24 hours. Next day fill and bleed clutch and bingo, I can now see if the fluid is low. Here's a couple of photos, one of the brake cylinder with the old OEM yellow'd glass, and the clutch with the new glass installed.

I used them also for my '86 Interstate - extremely easy to deal with, very fast shipping, very reasonable price! Beat the heck out of having to replace the whole master cylinder!
"In Valor there is Hope" Tacitus
Reply
#3 09-29-2013, 11:48 AM,
I have them on order... but they take a few days extra to get to Canada.
Reply
#4 10-01-2013, 05:10 PM,
(10-01-2013, 05:10 PM)Wingnoob Wrote: I have them on order... but they take a few days extra to get to Canada.

Just installed - my clutch is happy now! Good thing too, it was full of brown mud... bled the whole system until it was clean all the way through.

I removed the MC entirely so I could work on it on the bench. Used JB Weld to glue the new glass in place. Man the old one was hard to get out.

Reinstalled and bled at the MC banjo - took only about 2 squeezes to get the clutch solid. But them it took about 100 more to clean out the system and get clean fluid at the bottom... must have used about 1/2 litre of DOT 4.
Reply
#5 10-13-2013, 06:01 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Master Cylinder sight glass 18 2,808 06-07-2013, 06:49 PM
Last Post: Frank
  Master Cylinder Rebuild Kits wildhorse 5 598 05-23-2012, 03:03 AM
Last Post: PanMan75
  Front Master Brake Master Cylinder SIR tricky 15 2,556 01-30-2012, 07:40 PM
Last Post: seabee
  Rear Master Cylinder Boot - how do you fit it? sheridat 3 541 01-26-2012, 10:16 PM
Last Post: seabee
  To Fix a Leaking Master Cylinder Cover...or not desertrefugee 6 912 11-21-2011, 07:22 PM
Last Post: desertrefugee
  rebuilt calipers - now master cylinder problem 861200GW 5 603 03-19-2011, 06:09 AM
Last Post: unionjack
  brake master cylinder arkansassuperdrafter 1 320 06-06-2010, 03:44 PM
Last Post: arkansassuperdrafter
  Brake Caliper/RR Master cylinder exploded view 6 697 05-01-2010, 05:28 AM
Last Post: admin
  Brake and clutch sight glases 3 356 12-13-2009, 09:04 AM
Last Post: Guest
  sight glass replacement Jim Penner 3 364 11-04-2009, 08:26 PM
Last Post: Ed Z

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html