Thread Rating:
  • 4 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carb Removal 1985 Aspencade
(04-14-2013, 06:08 PM)Golden Highway Wrote: When I looked at your pictures it looked like a bigger job then I had hoped for, but thought just maybe it just look like i had to remove everything to get to them. The carbs were just rebuilt at the end of last summer. They used all new parts instead of just cleaning. Why they didn't replace the original cables at that time is beyond me. They are sticking now. I could clean and lube them but if I am going to go through all that work I will be putting new ones in. Thanks for the information.

Our bike is touchy as to how you route the cables on the left side out from under the "false tank" bodywork. Any kind of pinch here will cause the throttle to bind a bit and stick off idle.

Thanks for the nice set of images Frank.


Reply
#8 04-15-2013, 03:54 AM,


Messages In This Thread
Carb Removal 1985 Aspencade - by Frank - 04-13-2013, 09:47 AM
RE: Carb Removal 1985 Aspencade - by seabee - 04-13-2013, 07:41 PM
RE: Carb Removal 1985 Aspencade - by PanMan75 - 04-14-2013, 04:48 AM
RE: Carb Removal 1985 Aspencade - by Frank - 04-14-2013, 05:36 PM
RE: Carb Removal 1985 Aspencade - by wingandaprayer - 04-15-2013, 03:54 AM
RE: Carb Removal 1985 Aspencade - by mancrypt - 04-20-2013, 03:35 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  84 aspencade carb issues tongy66086 2 3,233 12-29-2015, 12:21 PM
Last Post: bs175dths
  84 Aspencade Carb parts - starter valve actuator insignia100 2 2,699 11-06-2014, 11:11 AM
Last Post: bs175dths
  Carb removal... Discus 6 3,180 04-11-2012, 08:55 PM
Last Post: Guest
  1985 GL1200 Carb. Rebuild 49 21,889 08-04-2009, 01:19 PM
Last Post: admin
  carb manifold removal or moving 10 4,457 06-12-2009, 05:25 AM
Last Post: Ed Z

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html