Thread Rating:
  • 3 Vote(s) - 2.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carb removal...
Ok, I got it out. I didn't have a chance to work on the bike yesterday but today I got the throttle cables out/disconnected and I was still having problems. I realized that I had forgotten to disconnect the front left secondary supply tube so it was holding the bank/creating resistance.

Now to cleaning. Quick question: Is it possible to clean the carbs (every important parts) by leaving the carb bodies on the assembly. If I take the covers off and the float bowl, do I have access to what I need to clean or do I really have to split the whole thing.

Thanks again!
Reply
#3 04-11-2012, 04:06 PM,


Messages In This Thread
Carb removal... - by Discus - 04-09-2012, 10:54 PM
Re: Carb removal... - by wingandaprayer - 04-10-2012, 10:29 AM
Re: Carb removal... - by Discus - 04-11-2012, 04:06 PM
Re: Carb removal... - by SIR tricky - 04-11-2012, 04:23 PM
Re: Carb removal... - by Discus - 04-11-2012, 04:44 PM
Re: Carb removal... - by Guest - 04-11-2012, 08:55 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Carb Removal 1985 Aspencade Frank 8 4,330 04-20-2013, 03:35 PM
Last Post: mancrypt
  carb manifold removal or moving 10 1,720 06-12-2009, 05:25 AM
Last Post: Ed Z

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html