Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
engine swap-no fire (cdi specs)
#-O hi iam new to her,i am a ex-honda mech. of three years and put a 4.9l spfi in a fiero with a five speed without a hitch.At the honda shop i worked on wings including my 1st one a 1980 gl1100 s, a basket cace. 2nd one 1985 gl1200 i never had to any major repairs will i was there (engine tear downs) but did everything else.my problem is this my current bike is a 1200 a with 105,000 miles showing, i had a major engine issues caused by human error (myself)i swaped in a 85 ltd into my 84 asp. . Did not have to change gas tank and had to change pulse gen. connector and the neutral switch connector left coolant sensor and knock sensor in to plug the holes so far no problems. Now here is the problem, I had spark and the engine poped off a couple of times then no fire on any plug, the pg's are ohming out at 168 that is low according to the book but the readings change when the engine turns over.I used the 84 cdi box, since the ohms are 1200-1300 on the 84 is it posible i fried the cdi? What is the specs on the 84 cdi and how do you check it? ps i had my 85 loose two cycl. on start up one day and after checking and replaceing pg's like my boss thought it was what my 1st thought was a $450.00 cdi, he said in 15 years working on bikes that was the 1st cdi in a 1200 goldwing.
Reply
#1 04-22-2010, 10:00 PM,


Messages In This Thread
engine swap-no fire (cdi specs) - by Guest - 04-22-2010, 10:00 PM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 06:26 AM
Re: engine swap-no fire (cdi specs) - by admin - 04-23-2010, 07:11 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 08:18 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 08:34 AM
Re: engine swap-no fire (cdi specs) - by admin - 04-23-2010, 09:24 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 09:39 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 01:30 PM
Re: engine swap-no fire (cdi specs) - by admin - 04-23-2010, 02:21 PM
Re: engine swap-no fire (cdi specs) - by Guest - 04-23-2010, 08:11 PM
Re: engine swap-no fire (cdi specs) - by roscoepc - 04-24-2010, 12:13 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-24-2010, 08:22 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-24-2010, 09:53 AM
Re: engine swap-no fire (cdi specs) - by admin - 04-24-2010, 11:34 AM
Re: engine swap-no fire (cdi specs) - by Guest - 04-24-2010, 08:48 PM
Re: engine swap-no fire (cdi specs) - by Guest - 06-13-2010, 08:59 AM
Re: engine swap-no fire (cdi specs) - by admin - 06-13-2010, 11:06 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html