Thread Rating:
  • 4 Vote(s) - 3.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carb still pops after rebuild
Hi Everyone

I have a 1985 GL1200 Interstate. I just finish rebuilding the carbs with Randakk's carb kit, I also syncronized the carbs and I must say it does run better but I do not know for how long. I still get the carb to pop at about 2000 to 3000 RPM's but not all the time.
I sure could use some suggestion's about now, I really don't have much left to pull out.
So far since my recent purchase of this machine, I have rebuilt the front forks (Seals and springs), I have replaced the timing belts. then of course the carb rebuild. My investment is getting out of hand in repairs, and the time it has consumed has been also been as great.
My mechanic told me that there was a small exhaust leak but I haven't found it.
I don't know if a leak in the exhaust could cause this problem I am having with the carbs, or maybe something else.
Any suggestions?
Reply
#1 08-27-2008, 07:22 PM,


Messages In This Thread
Carb still pops after rebuild - by Guest - 08-27-2008, 07:22 PM
Re: Carb still pops after rebuild - by Oldman - 08-28-2008, 07:25 AM
Re: Carb still pops after rebuild - by MikeM - 08-28-2008, 06:23 PM
Re: Carb still pops after rebuild - by cjh - 06-21-2011, 02:27 PM
Shim? - by MRGONE - 10-23-2011, 04:49 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Carb Rebuild marksaunders 12 5,564 05-17-2014, 02:24 PM
Last Post: marksaunders
  84 1200 carb rebuild kywinger 1 1,736 04-25-2013, 02:39 PM
Last Post: bs175dths
  Pops & shoots at low speeds even when warm. littleitchy 20 5,919 05-11-2012, 10:32 PM
Last Post: ghostrider52005
  carb rebuild arkansassuperdrafter 4 1,863 09-14-2010, 01:27 PM
Last Post: bs175dths
  Carb Rebuild - Special Tools or Tips? scty_p 3 1,808 09-08-2009, 01:17 PM
Last Post: Guest
  1985 GL1200 Carb. Rebuild 49 16,596 08-04-2009, 01:19 PM
Last Post: admin
  Time for a Carb rebuild 14 5,931 08-26-2007, 08:16 PM
Last Post: Guest

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html