Thread Rating:
  • 3 Vote(s) - 3.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Slide valve diaphragms
Mine had actually shrink a bit and I gently warmed them and hand stretched them until they sat in the right place while putting the covers on.

For the test. I used a vacuum cleaner hose that I could descrease the suction out of from the vacuum then loosely coupled it to the engine side of the carburetor throat. With the vacuum cleaner running in this fashion I would start opening the throttle butterfly and observe the slide opening in the throttle bore.

Not real scientific but it worked
Andy
Silver 1984 Interstate
GWRRA WAO
Reply
#2 06-21-2014, 09:09 PM,


Messages In This Thread
Slide valve diaphragms - by pstelter - 06-21-2014, 07:54 PM
RE: Slide valve diaphragms - by BigBro - 06-21-2014, 09:09 PM
RE: Slide valve diaphragms - by bs175dths - 06-24-2014, 02:54 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Slide Diaphragms wildhorse 1 828 06-11-2012, 05:25 PM
Last Post: SIR tricky
  Carb Slide Diaphragms from SaberCycle - I got mine dwitgoldwing 3 1,149 10-30-2009, 03:37 PM
Last Post:
  Replacement Honda GL1200 CV Slide Diaphragms randakk 3 1,169 05-12-2009, 06:48 AM
Last Post: Guest

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html