charging system question - Printable Version +- GL1200 GOLDWINGS (http://www.gl1200goldwings.com/gl1200) +-- Forum: TECH CENTER (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=39) +--- Forum: CHARGING SYSTEM AND CONVERSION ALTERNATORS (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=9) +--- Thread: charging system question (/showthread.php?tid=9990) |
charging system question - yiterp - 05-07-2013 my bikes charging system always runs at about 14 volts but every once in awhile when i first start it is only putting out 10 volts or so then after a minute output is right were it should be and all is ok. any thoughts on what might be causing this? RE: charging system question - neoracer - 05-07-2013 could be a draw on the system to recharge the battery and maybe rpm's aren't high enough,might want to recheck your stator,regulator and solenoid connectors RE: charging system question - yiterp - 05-08-2013 found plug at starter solenoid burnt and melted--new solenoid on it's way--will hardwire in RE: charging system question - neoracer - 05-08-2013 new solenoid not needed,just need to make the solenoid/ato fuse mod just do tricky's mod,takes care of two things at once http://www.gl1200goldwings.com/gl1200/showthread.php?tid=9871 RE: charging system question - yiterp - 05-08-2013 (05-08-2013, 12:56 PM)neoracer Wrote: new solenoid not needed,just need to make the solenoid/ato fuse mod cool--thanks alot--looks pretty easy in trickys pics RE: charging system question - neoracer - 05-08-2013 just make sure you get a good quality fuseholder that grips the fuse tightly,auto parts stores are the best source,bypass radio shack or HF |