GL1200 jet needles - Printable Version +- GL1200 GOLDWINGS (http://www.gl1200goldwings.com/gl1200) +-- Forum: TECH CENTER (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=39) +--- Forum: CARBS AND TUNING (http://www.gl1200goldwings.com/gl1200/forumdisplay.php?fid=13) +--- Thread: GL1200 jet needles (/showthread.php?tid=8506) |
GL1200 jet needles - Tradersden - 07-04-2011 Hi Folks, I am having a rich running problem on my 86 GL1200 Aspencade. I pulled the jet needles out of the carbs and found them to have a flat spot along the taper of the needles. I am assuming that these jet needles should be perfectly round along the entire length of the shaft. I have also looked at a friends needles and his are also showing a flat spot. 1. Should these needles be round along teh entire length of the shaft? 2. Anybody know where to get a replacement set of jet needles and jet needle holders? I cannot find a source for replacements anywhere. Thanks, Stephen. Re: GL1200 jet needles - SIR tricky - 07-04-2011 You might talk to this person: <!-- m --><a class="postlink" href="http://www.randakks.com/Carb%20Parts.htm#9B">http://www.randakks.com/Carb%20Parts.htm#9B</a><!-- m --> Re: GL1200 jet needles - Tradersden - 07-04-2011 Yes, I have checked Randakk's website, I will be ordering a carb overhaul kit from him, but it does not include the jet needles..... Re: GL1200 jet needles - bluewing - 07-04-2011 I got a set at my local Dealer, you might try checking out some of them. Re: GL1200 jet needles - Tradersden - 07-05-2011 Hi Bluewing, Who is your local dealer, mine does not have any. I can try calling your dealer Re: GL1200 jet needles - bluewing - 07-05-2011 Tradersden Wrote:Hi Bluewing, Who is your local dealer, mine does not have any. I can try calling your dealer I got mine a Cameron Cycle in Peterborough Ontario. I just phoned them and they are out of stock and can't get any more. I will try a few more Dealers in this area tomorrow and let you know if I find any. Re: GL1200 jet needles - KnoxSwift - 07-06-2011 You could try calling these guys: <!-- m --><a class="postlink" href="http://jetsrus.com/">http://jetsrus.com/</a><!-- m --> You will need to know the Brand and Model info from your carbs. Re: GL1200 jet needles - Bob Henshaw - 07-06-2011 Try these people <!-- w --><a class="postlink" href="http://www.siriusconinc.com">www.siriusconinc.com</a><!-- w --> they have a store in Kitchener, Ontario, Canada and somewhere in New York, USA and have the jet needles as part of a overhaul kit. I and a few friends have purchased them and installed them with no problems. Bob |